R3102-R3103-HP 6600/HSR6600 Routers Fundamentals Command Reference

119
Usage guidelines
CAUTION:
Use this command with caution. On the 6602/HSR6602 router, this command permanently deletes the
next-startup configuration file from the device. On the 6604/6608/6616 router, this command
permanently deletes the next-startup configuration files from both MPUs.
Delete the next-startup configuration file if it does not match the software version or is corrupted.
You can delete the main, the backup, or both. If the main and backup next-startup configuration files are
the same file, the system sets the attribute of the configuration file to NULL instead of deleting the file. You
can permanently delete the file after its attribute changes to NULL.
If no configuration file attribute is specified, the reset saved-configuration command deletes the main
startup configuration file.
Examples
# On the 6602 router, delete the next-startup configuration file.
<Sysname> reset saved-configuration
The saved configuration file will be erased. Are you sure? [Y/N]:y
Configuration file in cfa0 is being cleared.
Please wait ...........
Configuration file is cleared.
# On the HSR6602 router, delete the next-startup configuration file.
<Sysname> reset saved-configuration
The saved configuration file will be erased. Are you sure? [Y/N]:y
Configuration file in flash is being cleared.
Please wait ...
..
MainBoard:
Configuration file is cleared.
# On the 6604/6608/6616 router, delete the next-startup configuration file.
<Sysname> reset saved-configuration
The saved configuration file will be erased. Are you sure? [Y/N]:y
Configuration file in cfa0 is being cleared.
Please wait ...
..
MainBoard:
Configuration file is cleared.
Slot 1:
Erase next configuration file successfully
Related commands
• display saved-configuration
• save