R3102-R3103-HP 6600/HSR6600 Routers Fundamentals Configuration Guide

94
Format Descri
p
tion Len
g
th Exam
p
le
drive:/[path]/file-
name
Specifies a file in a specific storage
medium on the device.
The drive argument represents the
storage medium name, typically
flash or cf.
If the device has only one storage
medium, you do not need to
specify the storage medium.
If the device has multiple storage
media, you must provide the
storage medium name.
1 to 135
characters
flash:/test/a.cfg indicates a file
named a.cfg in the test folder in the
root directory of the Flash memory.
Table 20 File name formats for an 6604, 6608, or 6616
Format Descri
p
tion Len
g
th Exam
p
le
file-name
Specifies a file in the current
working directory.
1 to 91
characters
a.cfg indicates a file named a.cfg
in the current working directory.
This working directory might be on
the active MPU or standby MPU.
path/file-name
Specifies a file in a specific folder
in the current working directory.
The path argument represents the
path to the file. If the file is in a
single-level folder, specify the
folder name for the argument. If the
file is in a nested folder, separate
each folder name by a forward
slash (/).
1 to 135
characters
test/a.cfg indicates a file named
a.cfg in the test folder in the current
working directory.
drive:/[path]/file-
name
Specifies a file in a specific storage
medium on the device.
The drive argument represents the
storage medium name.
The storage medium on the active
MPU is typically flash or cf.
The storage medium on the
standby MPU is typically
slotX#flash or slotX#cf, where X
represents the number of the slot
that hosts the standby MPU. For
example, slot1#flash. To view the
correspondence between an MPU
and its slot number, use the display
device command.
1 to 135
characters
flash:/test/a.cfg indicates a file
named a.cfg in the test folder in the
root directory of the Flash memory
on the active MPU.
To access the file a.cfg in the root
directory of the Flash on the
standby MPU in slot 1, enter
slot1#flash:/a.cfg for the file
name.