R3102-R3103-HP 6600/HSR6600 Routers Fundamentals Configuration Guide

125

[ftp] bye

# Specify new-config.cfg as the main next-startup configuration file.

<Router> startup saved-configuration new-config.cfg main

Please wait...

... Done!

# Specify soft-version2.bin as the main startup system software image.

<Router> boot-loader file soft-version2.bin main

# Reboot the router to complete the upgrade.

<Router> reboot

3. Use the display version command to verify the upgrade. (Details not shown.)

Upgrading the system software on the 6604/6608/6616

router

Network requirements

The current system software version is soft-version1 for the router in Figure 55. The latest system software

image soft-version2.bin is saved in the aaa directory of the FTP server. The router and the FTP server can

reach each other, and the PC and the router can reach each other.

Upgrade the system software of the router to soft-version2 through remote operations.

Figure 55 Network diagram

Configuration procedure

1. Configure the FTP server. (Details not shown.)

2. Configure the router:

# Use the save command to save the running configuration. (Details not shown.)

# Examine the free space of the CF card on the router for memory insufficiency. If the free space

is not sufficient for the new image file, delete unused files from the CF card. (Details not shown.)

# Log in to the FTP server.

<Router> ftp 2.2.2.2

Trying 2.2.2.2 ...

FTP Client

FTP Server

User

Telnet

Router

1.1.1.1/24

2.2.2.2/24

Internet