R3102-R3103-HP 6600/HSR6600 Routers High Availability Command Reference

192
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Usage guidelines
If no slot number is specified for the HSR6602/6604/6608/6616, all BFD session information is
displayed. If the all keyword is specified, the command displays the detailed BFD session information on
the card (or the MPU) in the specified slot, including those sessions not maintained by the card.
Examples
• On an 6602 router:
# Display detailed BFD session information on the device.
<Sysname> display bfd session verbose
Total session number: 1 Up session number: 1 Init mode: Active
IPv4 session working under Ctrl mode:
Local Discr: 1 Remote Discr: 1
Source IP: 111.1.1.1 Destination IP: 111.1.1.2
Session State: Up Interface: GigabitEthernet1/0/1
Min Trans Inter: 400ms Act Trans Inter: 400ms
Min Recv Inter: 400ms Act Detect Inter: 2000ms
Recv Pkt Num: 18 Send Pkt Num: 18
Hold Time: 1900ms Connect Type: Direct
Running Up for: 00:56:25 Auth mode: None
Protocol: OSPF
Diag Info: No Diagnostic
• On an HSR6602/6604/6608/6616 router:
# Display detailed information about the BFD sessions maintained by all the cards on the device.
<Sysname> display bfd session verbose
Total session number: 2 Up session number: 2 Init mode: Active
IPv4 session working under Ctrl mode:
Local Discr: 1 Remote Discr: 1
Source IP: 192.168.11.11 Destination IP: 192.168.11.10
Session State: Up Interface: GigabitEthernet1/0/1
Min Trans Inter: 200ms Act Trans Inter: 200ms
Min Recv Inter: 200ms Act Detect Inter: 1000ms
Running Up for: 00:02:36 Auth mode: None
Connect Type: Direct Board Num: 6
Protocol: OSPF/RSVP/MFW
Diag Info: No Diagnostic
Local Discr: 2 Remote Discr: 2
Source IP: 192.168.12.11 Destination IP: 192.168.12.10
Session State: Up Interface: GigabitEthernet1/0/2