R3102-R3103-HP 6600/HSR6600 Routers High Availability Command Reference

48
Field Descri
p
tion
SendLTR
Number of LTRs sent. If the MEP is inward-facing, the number of LTRs will not
be counted.
ReceiveLTM Number of LTMs received.
No CCM from some remote
MEPs is received.
Failure to receive CCMs from some remote MEPs. (This information is
displayed only when some CCMs are lost.)
One or more streams of error
CCMs is received. The
last-received CCM:
Display the content of the last error CCM when one or more error CCMs are
received. (This information is displayed only when error CCMs is/are
received.)
Maintenance domain
MD of the last error CCM message.
If this field is not supported, a hyphen (-) is displayed.
Maintenance association
MA of the last error CCM message.
If this field is not supported, a hyphen (-) is displayed.
MEP
ID of the MEP that sent the last error CCM message.
If this field is not supported, a hyphen (-) is displayed.
Sequence Number
Sequence number of the last error CCM.
If this field is not supported, a hyphen (-) is displayed.
Received Time Time when the last error CCM is received.
One or more streams of
cross-connect CCMs is
received. The last-received
CCM:
Cross-connect CCMs are received, and the content of the last cross-connect
CCM is displayed. (This information is displayed only when cross-connect
CCMs is/are received.)
Some other MEPs are
transmitting the RDI bit.
CCMs with the RDI flag bits set are received from other MEPs. (This
information is displayed only when this type of CCMs is/are received.)
display cfd meplist
Use display cfd meplist to display the MEP list in a service instance.
Syntax
display cfd meplist [ service-instance instance-id ] [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
service-instance instance-id: Specifies a service instance by its ID in the range of 1 to 32767.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.