R3102-R3103-HP 6600/HSR6600 Routers High Availability Configuration Guide

16
Step
Command
Remarks
2. Enable Ethernet OAM
remote loopback on a
specific port.
oam loopback interface
interface-type interface-number
Disabled by default.
Enabling Ethernet OAM remote loopback in Ethernet port
view
Step
Command
Remarks
1. Enter system view.
system-view
N/A
2. Enter Ethernet port view.
interface interface-type
interface-number
N/A
3. Enable Ethernet OAM
remote loopback on the port.
oam loopback
Disabled by default.
Rejecting the Ethernet OAM remote loopback request from a
remote port
The Ethernet OAM remote loopback function impacts other services. To solve this problem, you can
disable a port from being controlled by the Loopback Control OAMPDUs sent by a remote port. The
local port then rejects the Ethernet OAM remote loopback request from the remote port.
To reject the Ethernet OAM remote loopback request from a remote port:
Step
Command
Remarks
1. Enter system view.
system-view
N/A
2. Enter Ethernet port view.
interface interface-type
interface-number
N/A
3. Reject the Ethernet OAM
remote loopback request
from a remote port.
oam loopback reject-request
By default, a port does not reject the
Ethernet OAM remote loopback request
from a remote port.
Displaying and maintaining Ethernet OAM
configuration
Task
Command
Remarks
Display global Ethernet OAM
configuration.
display oam configuration [ |
{ begin | exclude | include }
regular-expression ]
Available in any view.