R3102-R3103-HP 6600/HSR6600 Routers High Availability Configuration Guide

25
Step
Command
Remarks
2. Create an MD.
cfd md md-name level level-value
Not created by default.
3. Create an MA.
cfd ma ma-name md md-name vlan
vlan-id
Not created by default.
4. Create a service instance.
cfd service-instance instance-id md
md-name ma ma-name
Not created by default.
Configuring MEPs
CFD is implemented through various operations on MEPs. As a MEP is configured on a service
instance, the MD level and VLAN attribute of the service instance become the attribute of the MEP.
Before creating MEPs, configure the MEP list first. A MEP list is a collection of local MEPs allowed to
be configured in an MA and the remote MEPs to be monitored.
IMPORTANT:
You cannot create a MEP if the MEP ID is not included in the MEP list of the service instance.
To configure a MEP:
Step
Command
Remarks
1. Enter system view.
system-view
N/A
2. Configure a MEP list.
cfd meplist mep-list
service-instance instance-id
By default, no MEP list is
configured.
3. Enter Ethernet interface view.
interface interface-type
interface-number
N/A
4. Create a MEP.
cfd mep mep-id service-instance
instance-id { inbound | outbound }
Not configured by default.
5. Enable the MEP.
cfd mep service-instance
instance-id mep mep-id enable
Disabled by default.
Configuring MIP generation rules
As functional entities in a service instance, MIPs respond to various CFD frames, such as LTM frames,
LBM frames, 1DM frames, DMM frames, and TST frames. You can choose appropriate MIP
generation rules based on your network design.
To configure the rules for generating MIPs:
Step
Command
Remarks
1. Enter system view.
system-view
N/A
2. Configure the rules
for generating MIPs.
cfd mip-rule { default | explicit }
service-instance instance-id
By default, neither MIPs nor the rules for
generating MIPs are configured.
Any of the following actions or cases can cause MIPs to be created or deleted after you have
configured the cfd mip-rule command: