R3102-R3103-HP 6600/HSR6600 Routers High Availability Configuration Guide

Configuration procedure

1. Configure Router A:

# Enable DLDP globally.

<RouterA> system-view

[RouterA] dldp enable

# Configure GigabitEthernet 3/0/1 to operate in full duplex mode and at 1000 Mbps, and

enable DLDP on the port.

[RouterA] interface gigabitethernet 3/0/1

[RouterA-GigabitEthernet3/0/1] duplex full

[RouterA-GigabitEthernet3/0/1] speed 1000

[RouterA-GigabitEthernet3/0/1] dldp enable

[RouterA-GigabitEthernet3/0/1] quit

# Configure GigabitEthernet 3/0/2 to operate in full duplex mode and at 1000 Mbps, and

enable DLDP on the port.

[RouterA] interface gigabitethernet 3/0/2

[RouterA-GigabitEthernet3/0/2] duplex full

[RouterA-GigabitEthernet3/0/2] speed 1000

[RouterA-GigabitEthernet3/0/2] dldp enable

[RouterA-GigabitEthernet3/0/2] quit

# Set the DLDP mode to enhanced.

[RouterA] dldp work-mode enhance

# Set the port shutdown mode to auto.

[RouterA] dldp unidirectional-shutdown auto

2. Configure Router B:

# Enable DLDP globally.

<RouterB> system-view

[RouterB] dldp enable

# Configure GigabitEthernet 3/0/1 to operate in full duplex mode and at 1000 Mbps, and

enable DLDP on it.

[RouterB] interface gigabitethernet 3/0/1

[RouterB-GigabitEthernet3/0/1] duplex full

[RouterB-GigabitEthernet3/0/1] speed 1000

[RouterB-GigabitEthernet3/0/1] dldp enable

[RouterB-GigabitEthernet3/0/1] quit

# Configure GigabitEthernet 3/0/2 to operate in full duplex mode and at 1000 Mbps, and

enable DLDP on it.

[RouterB] interface gigabitethernet 3/0/2

[RouterB-GigabitEthernet3/0/2] duplex full

[RouterB-GigabitEthernet3/0/2] speed 1000

[RouterB-GigabitEthernet3/0/2] dldp enable

[RouterB-GigabitEthernet3/0/2] quit

# Set the DLDP mode to enhanced.

[RouterB] dldp work-mode enhance

# Set the port shutdown mode to auto.

[RouterB] dldp unidirectional-shutdown auto