R3102-R3103-HP 6600/HSR6600 Routers High Availability Configuration Guide

60
Task
Remarks
Configuring the hold off timer
Optional
Configuring the keepalive timer
Optional
Configuring the topology stability timer
Optional
Configuring the TC timers
Optional
Configuring the TP timers
Optional
Configuring the WTR timer
Optional
Testing connectivity between RPR stations
Optional
Configuring basic RPR functions
Configuring an RPR physical port
To configure an RPRPOS interface:
Step
Command
Remarks
1. Enter system view.
system-view
N/A
2. Enter RPR physical port
view.
interface rprpos interface-number
N/A
3. Configure the description
for the interface.
description text
Optional.
By default, the description of an
RPR physical port is
interface-name Interface.
4. Set the overhead bytes of
the interface.
flag { c2 | { j0 | j1 } { sdh | sonet } }
flag-value
Optional.
By default, the C2 byte value of
an RPRPOS interface is 0x16, and
the SDH J0 and J1 byte values are
null.
5. Ignore CRC of the J1 byte.
flag j1 ignore
Optional.
By default, CRC is performed for
the J1 byte.
6. Set the framing format on
the interface.
frame-format { sdh | sonet }
Optional.
By default, the framing format is
SDH.
7. Set the SD or SF alarm
threshold for the interface.
threshold { sd | sf } value
Optional.
By default, the SD alarm threshold
is 5, and the SF alarm threshold is
3