R3102-R3103-HP 6600/HSR6600 Routers High Availability Configuration Guide

70
Task
Command
Remarks
Display RPR ringlet selection table
information.
display rpr rs-table { default |
dynamic | ipv6 | overall | static
| vrrp } [ rpr interface-number ] [ |
{ begin | exclude | include }
regular-expression ]
Available in any view.
Display statistics about traffic on
the RPR ring.
display rpr statistics { dmac |
smac } [ mac-address ] [ rpr
interface-number ] [ | { begin |
exclude | include }
regular-expression ]
Available in any view.
Display the settings of all
configurable RPR timers.
display rpr timers [ rpr
interface-number ] [ | { begin |
exclude | include }
regular-expression ]
Available in any view.
Display RPR topology information.
display rpr topology { all | local |
ring | stations } [ summary ] [ rpr
interface-number ] [ | { begin |
exclude | include }
regular-expression ]
Available in any view.
Display VRRP standby group
information of RPR.
display rpr vrrp-info [ rpr
interface-number ] [ | { begin |
exclude | include }
regular-expression ]
Available in any view.
Clear the statistics about
protection events on the RPR
station.
reset rpr protection statistics [ rpr
interface-number ]
Available in user view.
Clear the statistics of the specified
RPR physical ports.
reset counters interface [ rprpos
[ interface-number ] ]
Available in user view.
Clear the statistics of the specified
RPR logical interfaces.
reset counters interface [ rpr
[ interface-number ] ]
Available in user view.
RPR configuration examples
RPR interface binding configuration example
Network requirements
As shown in Figure 15, stations A through E form an RPR ring.
Bind the RPR physical ports to the RPR logical interface on each station.