R3102-R3103-HP 6600/HSR6600 Routers Interface Command Reference

95
Last clearing of counters: Never
Data in current interval (150 seconds elapsed):
0 Loss Frame Alignment Secs, 0 Framing Error Secs,
0 CRC Error Secs, 0 Alarm Indication Secs, 0 Loss-of-signals Secs,
0 Code Violations Secs, 0 Slip Secs, 0 E-Bit error Secs.
Table 17 Command output
Field Descri
p
tion
E1 2/0/0 current state: UP State of the interface.
Description : E1 2/0/0 Interface Description of the interface.
Work mode Work mode of the interface: E1 or CE1.
Cable type Cable type of the interface.
Frame-format Frame format of the interface: CRC4 or non-CRC4.
Source Clock Work mode of the source clock of the interface: master or slave.
Line Code Line code: AMI or HDB3.
Idle Code Idle code: 0x7E or 0xFF.
Itf type Interframe filling tag: 0x7E or 0xFF.
Itf number Number of interframe filling tags between two successive frames.
Loopback Loopback state.
Alarm State Alarm state.
Historical Statistics Statistics on the interface.
Last clearing of counters The last time when statistics on the interface was cleared.
Data in current interval (150 seconds
elapsed):
0 Loss Frame Alignment Secs, 0
Framing Error Secs,
0 CRC Error Secs, 0 Alarm Indication
Secs, 0 Loss-of-signals Secs,
0 Code Violations Secs, 0 Slip Secs, 0
E-Bit error Secs
Error statistics in the current interval.
error-diffusion restraint config
Use error-diffusion restraint config to configure the error packets diffusion restraint parameters.
Use undo error-diffusion restraint config to restore the default settings for the error packets diffusion
restraint parameters.
Syntax
error-diffusion restraint config detect-timer renew-timer threshold
undo error-diffusion restraint config