R3102-R3103-HP 6600/HSR6600 Routers Interface Command Reference

229
undo frame-format
Default
The framing format on the CPOS interface is SDH.
Views
CPOS interface view
Default command level
2: System level
Parameters
sdh: Sets framing format to synchronous digital hierarchy (SDH).
sonet: Sets framing format to synchronous optical network (SONET).
Examples
# Set the framing format on interface CPOS 2/0/0 to SONET.
<Sysname> system-view
[Sysname] controller cpos 2/0/0
[Sysname-Cpos2/0/0] frame-format sonet
ft3
Use ft3 to configure the specified T3 channel to operate in FT3 mode and configure its FT3 DSU mode
or FT3 subrate.
Use undo ft3 to restore the default.
Syntax
ft3 t3-number { dsu-mode { 0 | 1 | 2 | 3 | 4 } | subrate sub-number }
undo ft3 t3-number { dsu-mode | subrate }
Default
For an FT3 channel, the DSU mode is 0 (Digital Link) and the subrate is 44210 kbps.
Views
CPOS interface view
Default command level
2: System level
Parameters
t3-number: Number of a T3 channel on the current CPOS interface, in the range of 1 to 3.
dsu-mode: Sets the DSU mode for fractional T3 (FT3).
Table 31 FT3 DSU mode options
Keyword DSU mode (vendor) Subrate range
Total number of
subrate
g
rades
0 Digital Link
300 to 44210 kbps in steps of
300746 bps
147