R3102-R3103-HP 6600/HSR6600 Routers Interface Command Reference

19
Packets dropped by transmit egress aging: 246
Table 9 Command output
Field Descri
p
tion
Packets dropped by GBP full or insufficient
bandwidth
Packets that are dropped because of insufficient buffer or
bandwidth..
Packets dropped by FFP Packets that are filtered out.
Packets dropped by STP non-forwarding state
Packets that are dropped because STP is in the
non-forwarding state.
Packets dropped by Rate-limit
Packets that are dropped because of the rate limit set on the
device.
Packets dropped by broadcast-suppression
Packets that are dropped because of broadcast
suppression.
Packets dropped by unicast-suppression
Packets that are dropped because of unknown unicast
suppression.
Packets dropped by multicast-suppression Packets that are dropped because of multicast suppression.
Packets dropped by transmit egress aging Outbound packets that are timed out.
display packet-drop summary
Use display packet-drop summary to display summary information about dropped packets on all
interfaces.
Syntax
display packet-drop summary [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Examples
# Display information about dropped packets on all interfaces.
<Sysname> display packet-drop summary
All interfaces:
Packets dropped by GBP full or insufficient bandwidth: 301
Packets dropped by FFP: 261