R3102-R3103-HP 6600/HSR6600 Routers Interface Configuration Guide

18
Task Command Remarks
Display traffic statistics for
the specified interfaces.
display counters { inbound | outbound } interface
[ interface-type ] [ | { begin | exclude | include }
regular-expression ]
Available in any view.
Display traffic rate statistics
over the last sampling
interval.
display counters rate { inbound | outbound }
interface [ interface-type ] [ | { begin | exclude |
include } regular-expression ]
Available in any view.
Display information about
discarded packets on the
specified interfaces.
display packet-drop interface [ interface-type
[ interface-number ] ] [ | { begin | exclude |
include } regular-expression ]
Available in any view.
Display summary
information about
discarded packets on all
interfaces.
display packet-drop summary [ | { begin | exclude
| include } regular-expression ]
Available in any view.
Display information about a
manual port group or all
manual port groups.
display port-group manual [ all | name
port-group-name ] [ | { begin | exclude | include }
regular-expression ]
Available in any view.
Display information about
the loopback function.
display loopback-detection [ | { begin | exclude |
include } regular-expression ]
Available in any view.
Display information about
Layer 3 virtual Ethernet
interfaces.
display interface [ virtual-ethernet ] [ brief
[ down ] ] [ | { begin | exclude | include }
regular-expression ]
display interface virtual-ethernet
{ interface-number } [ brief ] [ | { begin | exclude |
include } regular-expression ]
Available in any view.
Display information about
storm control.
display storm-constrain [ broadcast | multicast |
unicast ] [ interface interface-type
interface-number ] [ | { begin | exclude | include }
regular-expression ]
Available in any view.
Clear the interface or
subinterface statistics.
reset counters interface [ interface-type
[ interface-number |
interface-number.subnumber ] ]
Available in user view.
Clear the statistics of
discarded packets on the
specified interfaces.
reset packet-drop interface [ interface-type
[ interface-number ] ]
Available in user view.
Clear the statistics of the
specified Layer 3 virtual
Ethernet interface.
reset counters interface [ virtual-ethernet
[ interface-number | ]
Available in user view.
The display port-group manual, display packet-drop interface, display packet-drop summary, display
loopback-detection, display storm-constrain, and reset packet-drop interface commands are supported
on only 6604/6608/6616 routers configured with RPE-X1 or RSE-X1 modules.