R3102-R3103-HP 6600/HSR6600 Routers IP Multicast Command Reference

64
IP group(s):the following ip group(s) match to one mac group.
IP group address:224.1.1.1
(1.1.1.1, 224.1.1.1):
Attribute: Host Port
Host port(s):total 1 port(s).
GE2/1/2 (D) ( 00:03:23 )
MAC group(s):
MAC group address:0100-5e01-0101
Host port(s):total 1 port(s).
GE2/1/2
Table 15 Command output
Field Description
Total 1 IP Group(s). Total number of IP multicast groups.
Total 1 IP Source(s). Total number of IP multicast sources.
Total 1 MAC Group(s). Total number of MAC multicast groups.
Port flags: D-Dynamic port,
S-Static port, C-Copy port
Port flags: D for a dynamic port, S for a static port, and C for a port copied
from a (*, G) entry to an (S, G) entry.
Subvlan flags: R-Real VLAN,
C-Copy VLAN
Sub-VLAN flags: R for a real egress sub-VLAN under the current entry, and
C for a sub-VLAN copied from a (*, G) entry to an (S, G) entry.
Router port(s) Number of router ports.
Router port unit board Mask indicating a board with a router port residing on it.
( 00:01:30 )
Remaining time of the aging timer for the dynamic member port or router
port.
On the HSR6602/6604/6608/6616 router, to display the remaining time
of a non-aggregation port that does not belong to the MPU, you must specify
the number of the slot where the corresponding card resides by using slot
slot-number. For an aggregation port, you do not need to do this.
IP group address Address of the IP multicast group.
MAC group address Address of the MAC multicast group.
Attribute Attribute of the IP multicast group.
Host port unit board Mask indicating a board with a member port residing on it.
Host port(s) Number of member ports.
display igmp host interface
Use display igmp host interface to display information about the hosts tracked by IGMP on the specified
interface.
Syntax
display igmp host interface interface-type interface-number group group-address [ source
source-address ] [ | { begin | exclude | include } regular-expression ]
Views
Any view