R3102-R3103-HP 6600/HSR6600 Routers Layer 2 - LAN Switching Command Reference

115
VLAN ID:3
Protocol Index Protocol Type
======================================================
0 ipv4
1 ipv6
Table 26 Command output
Field Descri
p
tion
VLAN ID ID of the protocol-based VLAN bound to the port.
Protocol Index Protocol template index.
Protocol Type Protocol type specified by the protocol template.
Related commands
display vlan
port hybrid protocol-vlan
Use port hybrid protocol-vlan to associate the hybrid ports with a protocol-based VLAN.
Use undo port hybrid protocol-vlan to remove the association.
Syntax
port hybrid protocol-vlan vlan vlan-id { protocol-index [ to protocol-end ] | all }
undo port hybrid protocol-vlan { vlan vlan-id { protocol-index [ to protocol-end ] | all } | all }
Views
Ethernet interface view, port group view
Default command level
2: System level
Parameters
vlan vlan-id: Specifies a VLAN ID in the range of 1 to 4094.
protocol-index: Specifies a protocol index. The value can be specified by the users or assigned by the
system automatically when the protocol-based VLAN is created. You can use the display protocol-vlan
vlan all command to display the protocol indexes. The value range for this argument is 0 to 15.
to protocol-end: Specifies the end protocol index. The protocol-end argument must be greater than or
equal to the beginning protocol index.
all: Specifies all protocols bound to vlan-id.
Usage guidelines
The configuration made in Ethernet interface view applies only to the port.
The configuration made in port group view applies to all ports in the port group.
Before you use this command, make the following configurations:
• Create a VLAN and associate it with specified protocols.
• Configure the link type as hybrid.