R3102-R3103-HP 6600/HSR6600 Routers Layer 2 - LAN Switching Command Reference

179
Examples
# Set the management address to 192.6.0.1 for GigabitEthernet 4/0/1.
<Sysname> system-view
[Sysname] interface GigabitEthernet 4/0/1
[Sysname-GigabitEthernet4/0/1] lldp management-address-tlv 192.6.0.1
lldp notification remote-change enable
Use lldp notification remote-change enable to enable LLDP trapping for a port or all ports in a port
group.
Use undo lldp notification remote-change enable to disable LLDP trapping.
Syntax
lldp notification remote-change enable
undo lldp notification remote-change enable
Default
LLDP trapping is disabled on ports.
Views
Layer 2 Ethernet interface view, Layer 3 Ethernet interface view, port group view
Default command level
2: System level
Usage guidelines
The following matrix shows the command and router compatibility in Layer 2 Ethernet interface view:
Command 6602 HSR6602 6604/6608/6616
lldp notification remote-change enable No No
Yes on SAP modules
operating in bridge mode
The following matrix shows the command and router compatibility in port group view:
Command 6602 HSR6602 6604/6608/6616
lldp notification remote-change enable No No
Yes on routers installed
with the MPU RPE-X1 or
RSE-X1
Examples
# Enable LLDP trapping for GigabitEthernet 4/0/1.
<Sysname> system-view
[Sysname] interface GigabitEthernet 4/0/1
[Sysname-GigabitEthernet4/0/1] lldp notification remote-change enable
lldp timer notification-interval
Use lldp timer notification-interval to set the LLDP trap transmit interval.