R3102-R3103-HP 6600/HSR6600 Routers Layer 2 - LAN Switching Command Reference

22
destination-mac address, source-mac address
Table 6 Command output
Field Descri
p
tion
Link-Aggregation Load-Sharing
Mode
Global link-aggregation load sharing criteria.
• If you have not configured the global link-aggregation load sharing
criteria, the default link-aggregation load sharing criteria for Layer 2
traffic and Layer 3 traffic are displayed.
• If you have configured the global link-aggregation load sharing
criteria, the configured ones are displayed.
Bridge-Aggregation10
Load-Sharing Mode
Link-aggregation load sharing criteria of the aggregation group
corresponding to the aggregate interface Bridge-Aggregation 10.
• If you have not configured the link-aggregation load sharing criteria
especially for this aggregation group, the global link-aggregation
load sharing criteria are displayed.
• If you have configured link-aggregation load sharing criteria
especially for this aggregation group, the configured ones are
displayed.
Route-Aggregation10
Load-Sharing Mode
Link-aggregation load sharing criteria of the aggregation group
corresponding to aggregate interface Route-Aggregation 10.
• If you have not configured the link-aggregation load sharing criteria
especially for this aggregation group, the global link-aggregation
load sharing criteria are displayed.
• If you have configured link-aggregation load sharing criteria
especially for this aggregation group, the configured ones are
displayed.
Layer 2 traffic: destination-mac
address, source-mac address
Default link-aggregation load sharing criteria for Layer 2 traffic.
Layer 3 traffic: destination-ip
address, source-ip address
Default link-aggregation load sharing criteria for Layer 3 traffic.
destination-mac address,
source-mac address
User-configured link-aggregation load sharing criteria. In this sample
output, the criteria are the source and destination MAC addresses of
packets.
display link-aggregation member-port
Use display link-aggregation member-port to display detailed link aggregation information for the
specified member ports. If no port is specified, this command displays detailed link aggregation
information for all member ports.
Syntax
display link-aggregation member-port [ interface-list ] [ | { begin | exclude | include }
regular-expression ]
Views
Any view
Default command level
1: Monitor level