R3102-R3103-HP 6600/HSR6600 Routers Layer 2 - LAN Switching Configuration Guide

150
Ste
p
Command Remarks
8. Create a QoS policy and enter
QoS policy view.
qos policy policy-name N/A
9. Associate the class with the
behavior in the QoS policy.
classifier classifier-name behavior
behavior-name
N/A
10. Return to system view.
quit N/A
11. Enter the view of interfaces
connecting to service providers.
• Enter Layer 2 Ethernet interface
view:
interface interface-type
interface-number
• Enter port group view:
port-group manual
port-group-name
Use one of the commands.
12. Apply the QoS policy to the
outgoing packets of the
interface.
qos apply policy policy-name outbound
N/A
Configuring the TPID value in VLAN tags
Configurations made in different views have different effect. You can configure the TPID value in VLAN
tags in one of the following views:
• System view—The configuration takes effect on all ports of the device.
• Interface view or port group view—The configuration takes effect on a port or all ports in a port
group.
In system view
To configure TPID values globally:
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Set the global TPID value in
CVLAN tags.
qinq ethernet-type customer-tag
hex-value
Optional.
The default setting is 0x8100.
In interface or port group view
To configure TPID values on a port or all ports in a port group:
Ste
p
Command Remarks
1. Enter system
view.
system-view N/A