R3102-R3103-HP 6600/HSR6600 Routers Layer 2 - WAN Command Reference Guide

53
# Display brief information about all MP-group interfaces in DOWN state.
<Sysname> display interface mp-group brief down
The brief information of interface(s) under route mode:
Link: ADM - administratively down; Stby - standby
Interface Link Cause
MP1 ADM Administratively
MP12 DOWN Not connected
Table 11 Command output
Field Descri
p
tion
current state
Physical state of the interface:
DOWN (Administratively)—The interface was shut down with the
shutdown command, that is, is administratively down.
DOWN—The interface is administratively up but physically down.
UP—The interface is both administratively and physically up.
Line protocol current state Data link layer state (UP or DOWN).
Description Description string of the interface.
The Maximum Transmit Unit MTU of the interface.
Hold timer Interval at which the current interface sends keepalive packets.
Internet protocol processing Network layer state (enabled or disabled).
LCP initial LCP negotiation is complete.
Physical Physical type of the interface.
Output queue : (Urgent queue :
Size/Length/Discards)
Output queue : (Protocol queue :
Size/Length/Discards)
Output queue : (FIFO queuing :
Size/Length/Discards)
Traffic statistics of the interface output queues.
Last clearing of counters: Never
Last time when statistics on the interface were cleared. Never
indicates that statistics on the interface were never cleared.
Last 300 seconds input: 0 bytes/sec 0
packets/sec
Last 300 seconds output: 0 bytes/sec
0 packets/sec
Average rate of input packets and output packets in the last 300
seconds.
0 packets input, 0 bytes, 0 drops
Total amount of the inbound packets of the interface (in the number of
packets and in bytes), and the number of packets dropped among
the inbound packets.
0 packets output, 0 bytes, 0 drops
Total amount of outbound packets of the interface (in the number of
packets and in bytes), and the number of packets dropped among
the outbound packets.
The brief information of interface(s)
under route mode
Brief information about Layer 3 interfaces.