R3102-R3103-HP 6600/HSR6600 Routers Layer 2 - WAN Command Reference Guide

72
undo ppp mp lfi size-per-frag
Default
The size of LFI fragments depends on the configuration of the ppp mp lfi delay-per-frag command.
Views
Virtual template interface view, MP-group interface view
Default command level
2: System level
Parameters
size: Maximum size of an LFI fragment, in bytes, in the range of 40 to 1500.
Examples
# Configure the maximum size of LFI fragments on interface Virtual-Template 1 as 80 bytes.
<Sysname> system-view
[Sysname] interface virtual-template 1
[Sysname-Virtual-Template1] ppp mp lfi size-per-frag 80