R3102-R3103-HP 6600/HSR6600 Routers Layer 2 - WAN Configuration Guide

105
Ste
p
Command Remarks
4. Specify a card to forward traffic for the HDLC
link bundle interface.
service slot slot-number
Optional.
By default:
• If all member interfaces
of the HDLC link bundle
interface are on the
same card, the card
processes or forwards
traffic for the bundle
interface.
• If the member interfaces
are on different cards,
the card with the first
selected member
interface on the member
list processes or forwards
traffic for the bundle
interface. (For the
member list of an HDLC
link bundle interface,
execute the display
bundle member
hdlc-bundle command.)
The 6602 routers do not
support this command.
5. Set the minimum number of selected member
interfaces required for bringing up the HDLC
link bundle.
bundle min-active links
number
Optional.
By default, no minimum
number of selected member
interfaces is required for an
HDLC link bundle to be
brought up.
6. Set the maximum number of selected
member interfaces allowed in the HDLC link
bundle.
bundle max-active links
number
Optional.
By default, the maximum
number of selected member
interfaces allowed in an
HDLC link bundle is not set.
7. Specify the minimum amount of bandwidth
required for bringing up the HDLC link
bundle.
bundle min-active
bandwidth bandwidth
Optional.
By default, the minimum
amount of bandwidth
required for bringing up an
HDLC link bundle is not set.
8. Set the intended bandwidth for the HDLC link
bundle interface.
bandwidth
bandwidth-value
Optional.