R3102-R3103-HP 6600/HSR6600 Routers Layer 2 - WAN Configuration Guide

# Configure Serial 2/0/2.

[RouterA-Virtual-Template1] quit

[RouterA] interface serial 2/0/2

[RouterA-Serial2/0/2] link-protocol ppp

[RouterA-Serial2/0/2] ppp authentication-mode pap domain system

[RouterA-Serial2/0/2] ppp pap local-user rta password simple rta

[RouterA-Serial2/0/2] ppp mp virtual-template 1

[RouterA-Serial2/0/2] shutdown

[RouterA-Serial2/0/2] undo shutdown

[RouterA-Serial2/0/2] quit

# Configure Serial 2/0/1.

[RouterA] interface serial 2/0/1

[RouterA-Serial2/0/1] link-protocol ppp

[RouterA-Serial2/0/1] ppp authentication-mode pap domain system

[RouterA-Serial2/0/1] ppp pap local-user rta password simple rta

[RouterA-Serial2/0/1] ppp mp virtual-template 1

[RouterA-Serial2/0/1] shutdown

[RouterA-Serial2/0/1] undo shutdown

[RouterA-Serial2/0/1] quit

# Configure local authentication for the PPP users in the default ISP domain system.

[RouterA] domain system

[RouterA-isp-system] authentication ppp local

[RouterA-isp-system] quit

2. Configure Router B:

# Configure the username and password of Router A.

<RouterB> system-view

[RouterB] local-user rta

[RouterB-luser-rta] password simple rta

[RouterB-luser-rta] service-type ppp

[RouterB-luser-rta] quit

# Create a VT interface and assign an IP address to it.

[RouterB] interface virtual-template 1

[RouterB-Virtual-Template1] ip address 8.1.1.2 24

[RouterB-Virtual-Template1] ppp mp binding-mode authentication

[RouterB-Virtual-Template1] quit

# Configure Serial 2/0/2.

[RouterB] interface serial 2/0/2

[RouterB-Serial2/0/2] link-protocol ppp

[RouterB-Serial2/0/2] ppp authentication-mode pap domain system

[RouterB-Serial2/0/2] ppp pap local-user rtb password simple rtb

[RouterB-Serial2/0/2] ppp mp virtual-template 1

[RouterB-Serial2/0/2] shutdown

[RouterB-Serial2/0/2] undo shutdown

[RouterB-Serial2/0/2] quit

# Configure Serial 2/0/1.

[RouterB] interface serial 2/0/1

[RouterB-Serial2/0/1] link-protocol ppp