R3102-R3103-HP 6600/HSR6600 Routers Layer 3 - IP Routing Command Reference

233
Field Description
MED Multi-Exit Discriminator attribute.
LocPrf Local preference value.
PrefVal Preferred value of the route.
Path AS_PATH attribute, recording the ASs the packet has passed to avoid routing loops.
PrefVal Preferred value.
Ogn
Origin attribute of the route:
• i—The route is interior to the AS. Summary routes and the routes injected with the
network command are considered IGP routes.
• e—The route is learned from the Exterior Gateway Protocol (EGP).
• ?—Short for INCOMPLETE. It indicates that the origin of the route is unknown and the
route is learned by other means.
display bgp routing-table as-path-acl
Use display bgp routing-table as-path-acl to display BGP routes permitted by an as-path ACL.
Syntax
display bgp routing-table as-path-acl as-path-acl-number [ | { begin | exclude | include }
regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
as-path-acl-number: Displays routing information permitted by the AS path ACL, which is specifies with a
number from 1 to 256.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Examples
# Display BGP routes permitted by AS path ACL 1.
<Sysname> display bgp routing-table as-path-acl 1
BGP Local router ID is 20.20.20.1
Status codes: * - valid, ^ - VPNv4 best, > - best, d - damped,
h - history, i - internal, s - suppressed, S - Stale