R3102-R3103-HP 6600/HSR6600 Routers MPLS Command Reference Guide

157
Examples
# Enable reoptimization, setting the reoptimization (automatic rerouting) frequency to 43200 seconds
(12 hours ).
<Sysname> system-view
[Sysname] interface tunnel 0
[Sysname-Tunnel0] mpls te reoptimization frequency 43200
mpls te reoptimization (user view)
Use mpls te reoptimization to start reoptimizing all reoptimization-enabled TE tunnels.
Syntax
mpls te reoptimization
Views
User view
Default command level
2: System level
Examples
# Start reoptimizing all reoptimization-enabled TE tunnels.
<Sysname> mpls te reoptimization
mpls te resv-style
Use mpls te resv-style to set the resource reservation style for the MPLS TE tunnel.
Use undo mpls te resv-style to restore the default.
Syntax
mpls te resv-style { ff | se }
undo mpls te resv-style
Default
The resource reservation style is SE.
Views
Tunnel interface view
Default command level
2: System level
Parameters
ff: Sets the resource reservation style to fixed filter (FF).
se: Sets the resource reservation style to shared explicit (SE).
Usage guidelines
You can configure FF and SE only when the signaling protocol is set to RSVP-TE.