R3102-R3103-HP 6600/HSR6600 Routers MPLS Command Reference Guide

198
AC Encapsulation : 100
**In Interface : Eth1/1
Service Instance ID : 2
Access Mode : Vlan
CE Type : Independent
AC Encapsulation : s-vid 101 c-vid 400 to 500 600 700
# Display the AC information for service instance 1 on Layer 2 Ethernet interface GigabitEthernet 2/1/1.
<Sysname> display mpls l2vpn fib ac vpws interface gigabitethernet 2/1/1 service-instance
1
**In Interface : Eth1/1
Service Instance ID : 1
Access Mode : Vlan
CE Type : PortVlan
AC Encapsulation : 2
InBytes : 34408752586
OutBytes : 13202790780
Table 81 Command output
Field Descri
p
tion
Total AC Entry
Total number of VPWS AC entries, which is displayed only when you
display all VPWS AC entries.
In Interface Incoming interface, which is bound to L2VPN.
AccessMode Access mode at the AC side.
CEType Interface encapsulation type at the AC side, PortVlan or Independent.
AC Encapsulation Encapsulation VLAN information at the AC side.
InBytes
Number of bytes received on the AC.
This field is displayed only when inbound traffic statistics is enabled for
the service instance.
OutBytes
Number of bytes sent by the AC.
This field is displayed only when outbound traffic statistics is enabled for
the service instance.
display mpls l2vpn fib pw vpws
Use display mpls l2vpn fib pw vpws to display pseudowire (PW) entry information for the MPLS L2VPN.
Syntax
display mpls l2vpn fib pw vpws [ interface interface-type interface-number [ service-instance
service-instanceid ] ] [ slot slot-number ] [ verbose ] [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level