R3102-R3103-HP 6600/HSR6600 Routers MPLS Command Reference Guide

205
display service-instance interface
NOTE:
This command is supported only on routers with SAP-4EXPs.
Use display service-instance interface to display information about one or all service instances created
on an interface.
Syntax
display service-instance interface interface-type interface-number [ service-instance instance-id ] [ |
{ begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
interface interface-type interface-number: Displays information about service instances on an interface
specified by its type and number.
service-instance instance-id: Displays information about the specified service instance. The instance-id
argument represents the ID of the instance, in the range of 1 to 4096. If this option is not specified,
information about all service instances on the specified interface is displayed.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Examples
# Display information about service instance 100 created on Ten-GigabitEthernet 1/0/1.
<Sysname> display service-instance interface Ten-gigabitethernet 1/0/1 service-instance
100
Service instance : 100
Encapsulation : c-vid 20
Rewrite inbound tag : remark 1-to-1 c-vid 30
Rewrite outbound tag : remark 1-to-1 c-vid 20
Local group : 1
Table 87 Command output
Field Descri
p
tion
Service instance ID of the service instance.
Encapsulation Packet matching rule, which is based on VLAN tags.