R3102-R3103-HP 6600/HSR6600 Routers MPLS Command Reference Guide

ManualsBrandsHP ManualsNetwork HardwareHP HSR6602-XG TAA-compliant Router

221

222

223

224

225

226

227

228

229

230

215

Examples

# Set the MPLS L2VPN MTU to 1000.

<Sysname> system-view

[Sysname] mpls l2vpn vpn1

[Sysname-mpls-l2vpn-vpn1] mtu 1000

ping lsp pw (for MPLS L2VPN)

Use ping lsp pw to check the connectivity of a Martini VC.

Syntax

packet-size | -t time-out | -v ] * pw ip-address pw-id pw-id

Views

Any view

Default command level

0: Visit level

Parameters

-a source-ip: Specifies the source IP address of Echo Request messages.

-c count: Specifies the number of request messages to be sent. The value range for the count argument is

1 to 4294967295, and the default is 5.

-exp exp-value: Specifies the EXP value for Echo Request messages. The value range for the exp-value

argument is 0 to 7, and the default is 0.

-h ttl-value: Specifies the TTL value for Echo Request messages. The value range for the ttl-value argument

is 1 to 255, and the default is 255.

-m wait-time: Specifies the interval for sending Echo Request messages. The value range for the wait-time

argument is 1 to 10000 milliseconds, and the default is 200 milliseconds.

-r reply-mode: Specifies the reply mode of a receiver in response to an Echo Request message. The

reply-mode argument can be 1 or 2 where 1 means "Do not respond" and 2 means "Respond by using

a UDP packet." The default is 2.

-s packet-size: Specifies the payload length of Echo Request messages. The value range for the

packet-size argument is 65 to 8100 bytes, and the default is 100 bytes.

-t time-out: Specifies the timeout interval for waiting for the response to an echo request message. The

value range for the time-out argument is 0 to 65535 milliseconds, and the default is 2000 milliseconds.

-v: Displays detailed response information.

pw ip-address: Specifies the IP address of a peer PE.

pw-id pw-id: Specifies the ID of the PW to the peer PE, in the range of 1 to 4294967295.

Examples

# Check the connectivity of the VC 301 to peer PE 3.3.3.9.

<Sysname> ping lsp pw 3.3.3.9 pw-id 301

LSP Ping FEC: FEC 128 PSEUDOWIRE (NEW) 3.3.3.9 301 : 100 data bytes, press CTRL_C to break

Reply from 100.1.2.1: bytes=100 Sequence=0 time = 31 ms