R3102-R3103-HP 6600/HSR6600 Routers MPLS Command Reference Guide

255
-m wait-time: Specifies the interval for sending Echo Request messages. The value range for the wait-time
argument is 1 to 10000 milliseconds, and the default is 200 milliseconds.
-r reply-mode: Specifies the reply mode of the receiver in response to an Echo Request message. The
reply-mode argument can be 1 or 2, where 1 means "Do not respond," and 2 means "Respond using a
UDP packet." The default is 2.
-s packet-size: Specifies the payload length of the Echo Request message. The value range for the
packet-size argument is 65 to 8100 bytes, and the default is 100 bytes.
-t time-out: Specifies the timeout interval for waiting for the response to an echo request message. The
value range for the time-out argument is 0 to 65535 milliseconds, and the default is 2000 milliseconds.
-v: Displays detailed response information.
pw ip-address: Specifies the IP address of the peer PE.
pw-id pw-id: Specifies the ID of the PW to the peer PE, in the range of 1 to 4294967295.
Examples
# Check the connectivity of the PW to peer PE 3.3.3.9 that uses the PW ID of 301.
<Sysname> ping lsp pw 3.3.3.9 pw-id 301
LSP Ping FEC: FEC 128 PSEUDOWIRE (NEW) 3.3.3.9 301 : 100 data bytes, press CTRL_C to break
Reply from 100.1.2.1: bytes=100 Sequence=0 time = 31 ms
Reply from 100.1.2.1: bytes=100 Sequence=1 time = 62 ms
Reply from 100.1.2.1: bytes=100 Sequence=2 time = 62 ms
Reply from 100.1.2.1: bytes=100 Sequence=3 time = 62 ms
Reply from 100.1.2.1: bytes=100 Sequence=4 time = 62 ms
--- FEC: FEC 128 PSEUDOWIRE (NEW) 3.3.3.9 301 ping statistics ---
5 packet(s) transmitted
5 packet(s) received
0.00% packet loss
round-trip min/avg/max = 31/55/62 ms
pw-class
Use pw-class to create a PW class and enter PW class view.
Use undo pw-class to delete an existing PW class.
Syntax
pw-class pw-class-name
undo pw-class pw-class-name
Default
No PW class is created.
Views
System view
Default command level
2: System level