R3102-R3103-HP 6600/HSR6600 Routers MPLS Command Reference Guide

18
Field Descri
p
tion
Peer FT Flag
Indicates whether the peer has enabled the GR function for the
session. If the L bit in the FT Session TLV is set to 1, it indicates
that the GR function is enabled for the session.
Peer Discovery Source Interface that discovers the peer.
Related commands
• mpls ldp (interface view)
• mpls ldp (system view)
display mpls ldp remote-peer
Use display mpls ldp remote-peer to display information about remote LDP peers.
Syntax
display mpls ldp remote-peer [ remote-name remote-peer-name ] [ | { begin | exclude | include }
regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
remote-name remote-peer-name: Displays information about a remote peer. remote-peer-name indicates
the name of the remote peer, a case-insensitive string of 1 to 32 characters.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Examples
# Display information about remote peer BJI.
<Sysname> display mpls ldp remote-peer remote-name BJI
LDP Remote Entity Information
--------------------------------------------------------------------------
Remote Peer Name : BJI
Remote Peer IP : 3.3.3.3 LDP ID : 1.1.1.1:0
Transport Address : 1.1.1.1
Configured Keepalive Timer : 45 Sec
Configured Hello Timer : 45 Sec
Negotiated Hello Timer : 45 Sec