R3102-R3103-HP 6600/HSR6600 Routers MPLS Command Reference Guide

276
Field Descri
p
tion
Configured hold timer value Setting of the hold timer.
Keepalive timer value Keepalive interval.
Optional capabilities
Optional extended capabilities enabled for the peer
group.
ORF advertise capability
Outbound Route Filtering (ORF) capability supported
by the peer group.
Local
Indicates whether the local device supports sending
and receiving Route-refresh packets with ORF
information. The value can be:
• Both—Supports sending and receiving
Route-refresh messages with ORF information.
• Send—Supports sending Route-refresh messages
with ORF information.
• Receive—Supports receiving Route-refresh
messages with ORF information.
Peer Preferred Value
Preference value configured for routes received from
the peer.
Peer IP address of the peer.
AS AS number of the peer group.
MsgRcvd Number of messages received.
MsgSent Number of messages sent.
OutQ Number of messages waiting to be sent to the peer.
PrefRcv Number of prefixes received.
Up/Down Duration of the BGP session in the current state.
State Status of the peer.
display bgp vpnv4 network
Use display bgp vpnv4 network to display information about BGP VPNv4 routes injected into a specific
VPN instance or all VPN instances.
Syntax
display bgp vpnv4 { all | vpn-instance vpn-instance-name } network [ | { begin | exclude | include }
regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
all: Specifies all VPNv4 peers.