R3102-R3103-HP 6600/HSR6600 Routers MPLS Command Reference Guide

323
Use undo peer preferred-value to restore the default.
Syntax
peer { group-name | ip-address } preferred-value value
undo peer { group-name | ip-address } preferred-value
Default
The preference value for the routes received from a peer/peer group is 0.
Views
BGP-VPNv4 subaddress family view
Default command level
2: System level
Parameters
group-name: Name of the peer group, a case-sensitive string of 1 to 47 characters.
ip-address: IP address of the peer.
value: Preference value to be specified, in the range of 0 to 65535.
Examples
# In BGP-VPNv4 subaddress family view, set the preference value for the routes received from peer
131.10 8 .1.1 t o 5 0 .
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] ipv4-family vpnv4
[Sysname-bgp-af-vpnv4] peer 131.108.1.1 preferred-value 50
peer public-as-only (BGP-VPNv4 subaddress family view)
Use peer public-as-only to make outbound BGP updates carry no private AS numbers.
Use undo peer public-as-only to make outbound BGP updates carry private AS numbers.
Syntax
peer { group-name | ip-address } public-as-only
undo peer { group-name | ip-address } public-as-only
Default
A BGP update carries private AS numbers.
Views
BGP-VPNv4 subaddress family view
Default command level
2: System level
Parameters
group-name: Name of the peer group, a case-sensitive string of 1 to 47 characters.
ip-address: IP address of the peer.