R3102-R3103-HP 6600/HSR6600 Routers MPLS Command Reference Guide

58
undo mpls statistics enable { interface interface-type interface-number | lsp in-label in-label | tunnel
token token }
Default
MPLS statistics is disabled.
Views
System view
Default command level
2: System level
Parameters
interface interface-type interface-number: Specifies an interface by its type and number.
lsp in-label in-label: Specifies an LSP by its incoming label.
The following matrix shows the value ranges for the in-label argument:
6602 HSR6602 6604/6608/6616
0 to 57343 0 to 57343
• With the RSE-X1 MPU: 0 to 97279
• With other MPUs: 0 to 57343
tunnel token token: Specifies a public network tunnel by its LSP token. The value range for the token is 0
to 4294967295.
Examples
# Enable statistics for the LSP with the incoming label of 1024.
<Sysname> system-view
[Sysname] mpls statistics enable lsp in-label 1024
Related commands
• display mpls statistics interface
• display mpls statistics lsp in-label
• display mpls statistics tunnel
non-stop-routing
Use non-stop-routing to enable the LDP NSR function.
Use undo non-stop-routing to disable the LDP NSR function.
Syntax
non-stop-routing
undo non-stop-routing
Default
The LDP NSR function is disabled.
Views
MPLS LDP view