R3102-R3103-HP 6600/HSR6600 Routers MPLS Command Reference Guide

69
Parameters
ipv4 destination mask: Collects statistics on the IPv4 LSP for a FEC. The destination mask argument
specifies a FEC by an IPv4 destination address and the mask length. The value range for the mask length
is 0 to 32.
vpn-instance vpn-instance-name: Collects statistics on LSPs of the specified VPN. The vpn-instance-name
argument specifies an MPLS L3VPN by its instance name, a case-sensitive string of 1 to 31 characters.
ipv6 destination mask: Collects statistics on the BGP-IPv6 LSP for a FEC. The destination mask argument
specifies a FEC by an IPv6 destination address and the mask length. The value range for the mask length
is 0 to 128.
static: Collects statistics on static LSPs and static CR-LSPs.
Examples
# Enable MPLS statistics collection for the LSP for FEC 2.2.2.2/32.
<Sysname> system-view
[Sysname] mpls
[Sysname-mpls] statistics ipv4 2.2.2.2 32
Related commands
• display mpls statistics lsp in-label
• display mpls statistics tunnel
statistics interval
Use statistics interval to set the interval for reading collected statistics.
Use undo statistics interval to restore the default.
Syntax
statistics interval interval-time
undo statistics interval
Default
The LSP statistics reading interval is 0, which indicates that the system does not read collected LSP
statistics.
Views
MPLS view
Default command level
2: System level
Parameters
interval-time: Specifies the statistics reading interval in the range of 30 to 65535 seconds.
Examples
# Set the LSP statistics reading interval to 30 seconds.
<Sysname> system-view
[Sysname] mpls
[Sysname-mpls] statistics interval 30