R3102-R3103-HP 6600/HSR6600 Routers MPLS Command Reference Guide

71
ttl expiration enable
Use ttl expiration enable to enable the device to send back an ICMP TTL exceeded message when it
receives an MPLS TTL expired packet.
Use undo ttl expiration enable to disable sending back of ICMP TTL exceeded messages for MPLS TTL
expired messages.
Syntax
ttl expiration enable
undo ttl expiration enable
Default
This function is enabled.
Views
MPLS view
Default command level
2: System level
Examples
# Disable the system from sending back an ICMP TTL exceeded message when it receives an MPLS TTL
expired message.
<Sysname> system-view
[Sysname] mpls
[Sysname-mpls] undo ttl expiration enable
Related commands
ttl expiration pop
ttl expiration pop
Use ttl expiration pop to configure the system to use IP routes to send back the ICMP TTL exceeded
messages for TTL-expired MPLS packets that have only one level of label.
Use undo ttl expiration pop to configure the system to use LSPs to send back the ICMP TTL exceeded
messages for TTL-expired MPLS packets that have only one level of label.
Syntax
ttl expiration pop
undo ttl expiration pop
Default
An ICMP TTL exceeded message is sent back along an IP route when the TTL of an MPLS packet with a
one-level label stack expires.
Views
MPLS view
Default command level
2: System level