R3102-R3103-HP 6600/HSR6600 Routers MPLS Configuration Guide

218
Displaying and maintaining VPLS
Task Command Remarks
Display the VPLS information in the
BGP routing table.
display bgp vpls { all | group
[ group-name ] | peer [ [ ip-address ]
verbose ] | route-distinguisher
route-distinguisher [ site-id site-id
[ label-offset label-offset ] ] } [ | { begin |
exclude | include } regular-expression ]
Available in any view.
Display the MAC address table
information for one or all VPLS
instances.
display mac-address vsi [ vsi-name ]
[ blackhole | dynamic | static ] [ count ]
[ | { begin | exclude | include }
regular-expression ]
Available in any view.
Display information about VPLS
connections.
display vpls connection [ bgp | ldp |
static | vsi vsi-name ] [ block | down |
up ] [ verbose ] [ | { begin | exclude |
include } regular-expression ]
Available in any view.
Display the AC entry information
for one or all VPLS instances.
display mpls l2vpn fib ac vpls [ vsi
vsi-name | interface interface-type
interface-number ] [ slot slot-number ]
[ verbose ] [ | { begin | exclude |
include } regular-expression ]
Available in any view.
Display the PW entry information
for one or all VPLS instances.
display mpls l2vpn fib pw vpls [ vsi
vsi-name [ link link-id ] ] [ slot
slot-number ] [ verbose ] [ | { begin |
exclude | include } regular-expression ]
Available in any view.
Display information about one or
all VPLS instances.
display vsi [ vsi-name ] [ verbose ] [ |
{ begin | exclude | include }
regular-expression ]
Available in any view.
Display information about remote
VPLS connections.
display vsi remote { bgp | ldp } [ |
{ begin | exclude | include }
regular-expression ]
Available in any view.
Display information about one or
all PW classes.
display pw-class [ pw-class-name ] [ |
{ begin | exclude | include }
regular-expression ]
Available in any view.
Clear the MAC address table of
one or all VPLS instances.
reset mac-address vsi [ vsi-name ] Available in user view.
VPLS configuration examples
Binding VPLS instances to service instances
This example is available only for routers with SAP-4EXP.
Network requirements
CE 1 and CE 2 are connected to PE 1 and PE 2 through Layer 3 Ethernet interfaces.