R3102-R3103-HP 6600/HSR6600 Routers Network Management and Monitoring Configuration Guide

152
Ste
p
Command Remarks
6. Configure the
destination address and
destination UDP port
number for the IPv6
NetStream aggregation
data export.
ipv6 netstream export host
ip-address udp-port
[ vpn-instance
vpn-instance-name ]
By default, no destination address or
destination UDP port number is
configured in IPv6 NetStream
aggregation view.
If you expect to export only IPv6
NetStream aggregation data, configure
the destination address in related
aggregation view only.
7. Configure the source
interface for IPv6
NetStream aggregation
data export.
ipv6 netstream export source
interface interface-type
interface-number
Optional.
By default, the interface connecting to the
NetStream server is used as the source
interface.
• Source interfaces in different
aggregation views can be different.
• If no source interface is configured in
aggregation view, the source
interface configured in system view, if
any, is used.
• HP recommends that you connect the
network management interface to the
NetStream server.
8. Enable the current IPv6
NetStream aggregation
configuration.
enable Disabled by default
Configuring attributes of IPv6 NetStream data
export
Configuring IPv6 NetStream export format
The IPv6 NetStream export format exports IPv6 NetStream data in version 9 format, and the data fields
can be expanded to contain more information:
• Statistics about source AS, destination AS, and peer ASs in version 9 format.
• Statistics about BGP next hop in version 9 format.
To configure the IPv6 NetStream export format:
Ste
p
Command Remarks
1. Enter system view.
system-view N/A