R3102-R3103-HP 6600/HSR6600 Routers Security Configuration Guide

156
Figure 60 Network diagram
Configuration prerequisites
• Configure IP addresses for the host, router, and servers as shown in Figure 60 and make sure they
can reach each other before extended portal is enabled.
• Configure the RADIUS server properly to provide authentication and authorization functions for
users.
Configuration procedure
1. Configure a RADIUS scheme:
# Create a RADIUS scheme named rs1 and enter its view.
<Router> system-view
[Router] radius scheme rs1
# Set the server type for the RADIUS scheme. When using the IMC server, set the server type to
extended.
[Router-radius-rs1] server-type extended
# Specify the primary authentication/authorization server, and configure the keys for
communication with the servers.
[Router-radius-rs1] primary authentication 192.168.0.112
[Router-radius-rs1] key authentication radius
[Router-radius-rs1] user-name-format without-domain
# Configure the IP address of the security policy server.
[Router-radius-rs1] security-policy-server 192.168.0.113
[Router-radius-rs1] quit
2. Configure an authentication domain:
# Create an ISP domain named dm1 and enter its view.
[Router] domain dm1
# Configure AAA methods for the ISP domain.
[Router-isp-dm1] authentication portal radius-scheme rs1
[Router-isp-dm1] authorization portal radius-scheme rs1
[Router-isp-dm1] quit