R3102-R3103-HP 6600/HSR6600 Routers Security Configuration Guide

381
Figure 151 Adding a TCP service resource
4. Configure the common TCP service as described in Table 23.
5. Click Apply.
Table 23 Configuration items
Item Descri
p
tion
Resource Name
Enter a name for the common TCP service resource.
The resource name must be unique in the SSL VPN system. Resources are uniquely
identified by their names.
IMPORTANT:
If you do not configure the command for Command, HP recommends including the
resource type, local address, and local port in the resource name so that users can view
the desired information after they log in to the SSL VPN system.
Service Type Enter the type for the TCP service.
Remote Host
Enter the host name or IP address of the remote host that provides the common TCP
service.
Remote Port Enter the port number that the remote host uses for the common TCP service.
Local Host Enter a loopback address or a character string that represents a loopback address.
Local Port Enter the port number that the local host uses for the common TCP service.
Command Configure the Windows command for the resource.
Configuring IP network resources
The SSL VPN IP network access service supports all applications that operate at the IP layer and above,
providing secure communication between users and servers. Users do not need to know the application
types and configurations. After they log in to the SSL VPN service interface, the ActiveX SSL VPN client
will be automatically downloaded and started, and the users can access authorized services of certain
hosts securely.