R3303-HP 6600/HSR6600 Routers Fundamentals Command Reference

113
Configuration file in cfa0 is being cleared.
Please wait ...........
Configuration file is cleared.
# On the HSR6602 router, delete the next-startup configuration file.
<Sysname> reset saved-configuration
The saved configuration file will be erased. Are you sure? [Y/N]:y
Configuration file in flash is being cleared.
Please wait ...
..
MainBoard:
Configuration file is cleared.
# On the 6604/6608/6616 router, delete the next-startup configuration file.
<Sysname> reset saved-configuration
The saved configuration file will be erased. Are you sure? [Y/N]:y
Configuration file in cfa0 is being cleared.
Please wait ...
..
MainBoard:
Configuration file is cleared.
Slot 1:
Erase next configuration file successfully
Related commands
• display saved-configuration
• save
restore startup-configuration
Use restore startup-configuration to download a configuration file from a TFTP server and specify it as
the main next-startup configuration file.
Syntax
restore startup-configuration from src-addr src-filename
Views
User view
Default command level
3: Manage level
Parameters
src-addr: Specifies a TFTP server's IPv4 address or name. The name can comprise 1 to 20 characters.
src-filename: Specifies the file name of the configuration file to be downloaded.
Usage guidelines
This command is not supported in FIPS mode, because the device does not support to transfer files by
using TFTP in FIPS mode.
Before restoring the configuration file for the next startup, make sure the server is reachable, the server is
enabled with TFTP service, and you have read and write permissions.