R3303-HP 6600/HSR6600 Routers Fundamentals Command Reference

121
Parameters
cfgfile: Specifies a configuration file name with the extension .cfg. The file must be stored in the root
directory of a storage medium.
backup: Sets the configuration file as the backup next-startup configuration file.
main: Sets the configuration file as the main next-startup configuration file.
Usage guidelines
On the 6604/6608/6616 router, the startup saved-configuration command applies to both MPUs. To
successfully configure the command, verify that the specified file has been saved to the root directory of
the storage media on both active MPU and standby MPU.
If neither backup nor main is specified, the startup saved-configuration command specifies the main
next-startup configuration file.
For high availability, specify separate files as the main and backup next-startup configuration files, even
though they can be the same file.
The undo startup saved-configuration command changes the file attribute of the main and backup
next-startup configuration files to NULL, but the command does not delete the two configuration files.
You can also specify a configuration file as the startup configuration file to be used at the next startup
when you use the save command save the running configuration to it.
Examples
# On the 6602 router, specify a next-startup configuration file.
<Sysname> startup saved-configuration testcfg.cfg
Please wait ....
... Done!
# On the HSR6602 router, specify a next-startup configuration file.
<Sysname> startup saved-configuration testcfg.cfg
Please wait ...
Setting the master board ..........
... Done!
# On the 6604/6608/6616 router, specify a next-startup configuration file.
<Sysname> startup saved-configuration testcfg.cfg
Please wait ...
Setting the master board ..........
... Done!
Setting the slave board ...
Slot 1:
Set next configuration file successful
Related commands
display startup