R3303-HP 6600/HSR6600 Routers Fundamentals Command Reference

135
Syntax
patch location patch-location
Default
The patch loading location on the HSR6602 router is flash:.
The patch loading location on the 6602/6604/6608/6616 router is cfa0:.
Views
System view
Default command level
3: Manage level
Parameters
patch-location: Specifies the patch loading location, a string of 1 to 64 characters. The file must be saved
in the root directory of a storage medium.
Usage guidelines
This command specifies the location from which the device loads patches when executing the patch load
command.
For reliable patch loading, HP recommends saving patch files to the root directory of Flash memory
(flash:) on the HSR6602 router, and saving patch files to the root directory of CF card (cfa0:) on the
6602/6604/6608/6616 router.
If your device has an additional storage medium, you can save patch files on that storage medium except
that you must use this command to specify the file location.
If you device has only one storage medium, you do not need to execute this command.
The patch install patch-location command can change the patch loading location that has been
specified with the patch location command. The patch install file filename command does not change
the patch loading location.
Examples
# Configure the root directory of the CF card as the patch loading location.
<Sysname> system-view
[Sysname] patch location cfa0:
patch run
Use patch run to confirm ACTIVE patches.
Syntax
patch run [ patch-number ] [ slot slot-number ]
Views
System view
Default command level
3: Manage level