R3303-HP 6600/HSR6600 Routers Fundamentals Command Reference

193
[Sysname-job-saveconfig] view monitor
[Sysname-job-saveconfig] time 1 one-off delay 5 command save a.cfg
# Save the configuration file every 5 minutes.
<Sysname> system-view
[Sysname] job saveconfig
[Sysname-job-saveconfig] view monitor
[Sysname-job-saveconfig] time 1 repeating delay 5 command save a.cfg
Related commands
• job
• view
transceiver phony-alarm-disable
Use transceiver phony-alarm-disable to disable alarm traps for transceiver modules.
Use undo transceiver phony-alarm-disable to restore the default.
Syntax
transceiver phony-alarm-disable
undo transceiver phony-alarm-disable
Default
Alarm traps are enabled for transceiver modules.
Views
System view
Default command level
3: Manage level
Usage guidelines
If you install a transceiver module whose vendor name is not HP, the system repeatedly outputs traps and
logs to notify you to replace the module. To continue to use such a transceiver module that is
manufactured or customized by HP but has no vendor information, you can disable alarm traps so that
the system stops outputting alarm traps.
Examples
# Disable alarm traps for transceiver modules.
<Sysname> system-view
[Sysname] transceiver phony-alarm-disable
view
Use view to specify a view for a job.
Use undo view to remove the view of a job.
Syntax
view view-name
undo view