R3303-HP 6600/HSR6600 Routers Fundamentals Command Reference

console: Specifies the console user interface.

vty: Specifies the VTY user interface.

first-num2: Specifies the relative number of the first user interface.

last-num2: Specifies the relative number of the last user interface. This argument must be equal to or

greater than the first-num2 argument.

The following matrix shows the value ranges for the user interface number arguments:

ument 6602 HSR6602

6604/6608/6616

first-num1/

last-num1

0 to 246 0 to 11

MCP-X1/X2 MPU: 0 to 13

RPE-X1 MPU: 0 to 493

RSE-X1 MPU: 0 to 653

first-num2/

last-num2

AUX: 0

Console: 0

VTY: 0 to 4

AUX: 0 to 1

Console: 0 to 1

VTY: 0 to 4

Usage guidelines

If you use this command to enter a single user interface view, your configuration applies only to the user

interface.

If you use this command to enter multiple user interface views, your configuration applies to all the

specified user interfaces.

Examples

# Enter the view of user interface Console 0.

<Sysname> system-view

[Sysname] user-interface console 0

[Sysname-ui-console0]

# Enter the views of user interfaces VTY 0 to VTY 4.

<Sysname> system-view

[Sysname] user-interface vty 0 4

[Sysname-ui-vty0-4]