R3303-HP 6600/HSR6600 Routers High Availability Command Reference

79
Examples
# Display information about the dynamic ringlet selection tables of all RPR stations on your device.
<Sysname> display rpr rs-table dynamic
Dynamic ringlet selection table on interface: RPR1
MAC-Address Ringlet-ID TTL IP-Address Station-Name
-----------------------------------------------------------------------
00e0-fc00-1a01 Ringlet0 1 0.0.0.0
--- Total entrie(s): 1 ---
# Display information about the static ringlet selection tables of all RPR stations on your device.
<Sysname> display rpr rs-table static
Static ringlet selection table on interface: RPR1
MAC-Address Ringlet-ID Status
-----------------------------------
0003-0002-0002 Ringlet0 Invalid
--- Total entrie(s): 1 ---
Table 28 Command output
Field Descri
p
tion
Dynamic ringlet selection table on
interface
Dynamic ringlet selection table of the station corresponding to the
specified interface.
Static ringlet selection table on interface
Static ringlet selection table of the station corresponding to the
specified interface.
MAC-Address Destination MAC address.
Ringlet-ID Sending ringlet: 0 for Ringlet 0, 1 for Ringlet 1.
TTL Time to live. Number of hops for reaching the destination.
IP-Address
IP address of the destination. If the destination station has no IP
address, 0.0.0.0 is displayed.
Station-Name Name of the destination station.
Status Status of the entry: valid or invalid.
display rpr statistics
Use display rpr statistics to display traffic statistics for the specified or all RPR stations on the device.
Syntax
display rpr statistics { dmac | smac } [ mac-address ] [ rpr interface-number ] [ | { begin | exclude |
include } regular-expression ]
Views
Any view
Default command level
1: Monitor level