R3303-HP 6600/HSR6600 Routers High Availability Command Reference

85
Station topology information on interface: RPR1
Station entry on ringlet0
MAC-Address Psw Pse Esw Ese Wc Jp IP-Address Station-Name
---------------------------------------------------------------------
00e0-fc00-1a01 Idle Idle 0 0 0 0 0.0.0.0 StationB
Station entry on ringlet1
MAC-Address Psw Pse Esw Ese Wc Jp IP-Address Station-Name
---------------------------------------------------------------------
00e0-fc00-1a01 Idle Idle 0 0 0 0 0.0.0.0 StationB
Table 31 Command output
Field Descri
p
tion
Topology information items Items of topology information.
Pse:protection state, east
Protection state of the east span:
• Fs—Forced switch.
• Sf—Signal fail.
• Sd—Signal degrade.
• Ms—Manual switch.
• Wtr—Wait to restore.
• Idle.
Psw:protection state, west
Protection state of the west span:
• Fs—Forced switch.
• Sf—Signal fail.
• Sd—Signal degrade.
• Ms—Manual switch.
• Wtr—Wait to restore.
• Idle.
Ese:edge state, east
Edge state of the east span:
• 1—An edge has been detected.
• 0—No edge has been detected.
Esw:edge state, west
Edge state of the west span:
• 1—An edge has been detected.
• 0—No edge has been detected.
Wc:wrap protection configured
Wrap protection mode configured:
• 1—Wrapping mode.
• 0—Steering mode.
Jp:jumbo frame preferred
Indicates whether Jumbo frames are supported:
• 1—Supported.
• 0—Not supported.
Ring-level topology information on
interface
Topology information of the RPR station corresponding to the
specific interface.
Ringlet0 Number of stations on the west span.