R3303-HP 6600/HSR6600 Routers IP Multicast Command Reference

102
Parameters
interval: Specifies a startup query interval (interval between general queries that the IGMP querier sends
on startup) in seconds, in the range of 1 to 18000.
Examples
# Set the startup query interval to 5 seconds globally on the public network.
<Sysname> system-view
[Sysname] igmp
[Sysname-igmp] startup-query-interval 5
# Set the startup query interval to 5 seconds globally in VPN instance mvpn.
<Sysname> system-view
[Sysname] igmp vpn-instance mvpn
[Sysname-igmp-mvpn] startup-query-interval 5
Related commands
• igmp-startup-query-interval
• timer query
timer other-querier-present (IGMP view)
Use timer other-querier-present to configure the IGMP other querier present interval globally.
Use undo timer other-querier-present to restore the default.
Syntax
timer other-querier-present interval
undo timer other-querier-present
Default
The IGMP other querier present interval is [ IGMP general query interval ] × [ IGMP querier's robustness
variable ] + [ maximum response time for IGMP general queries ] /2.
Views
Public network IGMP view, VPN instance IGMP view
Default command level
2: System level
Parameters
interval: Specifies an IGMP other querier present interval, in the range of 60 to 300.
Examples
# Set the IGMP other querier present interval to 200 seconds globally on the public network.
<Sysname> system-view
[Sysname] igmp
[Sysname-igmp] timer other-querier-present 200
# Set the IGMP other querier present interval to 200 seconds globally in VPN instance mvpn.
<Sysname> system-view
[Sysname] igmp vpn-instance mvpn
[Sysname-igmp-mvpn] timer other-querier-present 200