R3303-HP 6600/HSR6600 Routers Layer 2 - WAN Command Reference Guide

159
Views
MFR interface view
Default command level
2: System level
Parameters
number: Number of fragments, in the range 1 to 16.
Examples
# Set the size of the sliding window to 8 for the MFR bundle interface MFR 4/0/0.
<Sysname> system-view
[Sysname] interface mfr 4/0/0
[Sysname-MFR4/0/0] mfr window-size 8
reset counters interface
Use reset counters interface to clear statistics of the specified or all MFR interfaces.
Syntax
reset counters interface [ mfr [ interface-number | interface-number.subnumber ] ]
Views
User view
Default command level
2: System level
Parameters
interface-number: MFR interface number.
interface-number.subnumber: MFR subinterface number. The interface-number argument is the main
interface number, and the subnumber argument is the subinterface number in the range of 0 to 1023.
Usage guidelines
To collect statistics spanning a specific period for an interface, you must clear statistics of the interface
before starting statistics collection.
• If you do not specify mfr, this command clears the statistics of all interfaces.
• If you specify the mfr but not an interface number, this command clears the statistics of all MFR
interfaces.
• If you specify both mfr and an interface number, this command clears the statistics of the specified
MFR interface.
Examples
# Clear statistics of interface MFR 4/0/0.
<Sysname> reset counters interface mfr 4/0/0
sub-interface rate-statistic
Use sub-interface rate-statistic to enable sub-interface rate statistics collection on the MFR interface.