R3303-HP 6600/HSR6600 Routers Layer 3 - IP Routing Command Reference

231
Table 48 Command output
Field Description
Peer IP address of the peer.
Date Date on which the Notification was sent or received.
Time Time at which the Notification was sent or received.
State
BGP session state:
• Up—The BGP session is up.
• Down—The BGP session is down.
Notification Error code and subcode of the Notification message.
Error/SubError
Error refers to the error code, which identifies the type
of the Notification.
SubError refers to the error subcode of the
Notification, which identifies the specific information
about the reported error.
display bgp peer received ip-prefix
Use display bgp peer received ip-prefix to display the prefix information in the ORF message from the
specified BGP peer.
Syntax
display bgp peer ip-address received ip-prefix [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
ip-address: Specifies a BGP peer by its IP address.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Examples
# Display the prefix information in the ORF message from the BGP peer 10.110.25.20.
<Sysname> display bgp peer 10.110.25.20 received ip-prefix
ORF ip-prefix entries: 2
ge: greater-equal le: less-equal
index rule prefix ge le
10 permit 111.111.111.0/24 26 32