R3303-HP 6600/HSR6600 Routers Layer 3 - IP Routing Command Reference

287
[Sysname] bgp 100
[Sysname-bgp] ipv4-family vpn-instance vpn1
[Sysname-bgp-ipv4-vpn1] peer test ttl-security hops 1
peer update-no-advertise (BGP view)
Use peer update-no-advertise to disable BGP from sending routing updates to the specified peer or peer
group, except for the default route sent by the peer default-route-advertise command.
Use undo peer update-no-advertise to restore the default.
Syntax
peer { group-name | ip-address } update-no-advertise
undo peer { group-name | ip-address } update-no-advertise
Default
BGP sends routing updates to peers.
Views
BGP view
Default command level
2: System level
Parameters
group-name: Specifies a peer group by its name, a string of 1 to 47 characters.
ip-address: Specifies a peer by its IP address.
Examples
# D i s a b l e B G P f ro m s e n d i n g r o u t i n g u p d a t e s t o t h e p e e r 1.1.1.1.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] peer 1.1.1.1 update-no-advertise
Related commands
display bgp routing-table
preference (BGP/BGP-VPN instance view)
Use preference to configure preferences for external, internal, and local routes.
Use undo preference to restore the default.
Syntax
preference { external-preference internal-preference local-preference | route-policy route-policy-name }
undo preference
Views
BGP view, BGP-VPN instance view